5. Disassembly and Assembly Procedures (P2422HEb)
NOTE:
This "Disassembly and Assembly Procedures" is for EMEA only, not for other regions. Please note
that Dell will deem warranty void if any disassembly is done on the monitors.
5.1 Disassembly SOP
Preparation before disassembly
1. Clean the room for work
2. Identify the area for material
3. Prepare the implement, equipment, materials as bellow:
1)
Working table
2)
Philips-head screwdriver
3)
Gloves
4)
Cleaning cloth
5)
ESD protection
Item
1
2
2
(P2422HEb)
Picture
1
2
3
Operation
To remove the stand:
1. Place the monitor on a
soft cloth or cushion
2. Press and hold the
stand release button
3. Lift the stand up and
away from the monitor
1. Unlock 4 RC screws
2. Disassemble Rear
Cover from Middle
Frame according to the
sequence shown in the
picture
- 10 -
Tool
Notes
Philips-head
screwdriver
Torsion of RC
screw: 9±1Kgf