Disassembly And Assembly Procedures; Disassembly Sop - Dell P3424WEB Service Manual

5. Disassembly and Assembly Procedures

NOTE:
This "Disassembly and Assembly Procedures" is for EMEA only, not for other regions. Please note
that Dell will deem warranty void if any disassembly is done on the monitors.

5.1 Disassembly SOP

Preparation before disassembly
1. Clean the room for work
2. Identify the area for material
3. Prepare the implement, equipment, materials as bellow：
1) Working table
2) Philips-head screwdriver
3) Gloves
4) Cleaning cloth
5) ESD protection
6) U3415WB Curve Sponge Jig
Item
1
2
Picture Operation
To remove the stand
1. Place the monitor
on U3415WB Curve
Sponge Jig
2. Press and hold the
stand release
button at the back
of the display.
3. Lift the stand up
and away from the
monitor.
1. Unlock 4 screws
- 11 -
Tool Notes
U3415WB Panel and
whole monitor
curve
head must be
sponge jig
put on
U3415WB
curve sponge
jig to avoid
panel damage.
It is not allowed
to place the
front side of
panel and
monitor head on
a flat surface
Philips-head
screwdriver
(Screw
Torque:
11±1Kgf)