Dell P2422HEc Service Manual page 15

5
3
1
6
7
4
3
1
2
1. Insert CTRL FFC into I/F BD
2. Assemble Rear Cover with
Middle Frame according to the
sequence shown in the picture
3. Lock 4 RC screws
1. Assemble Stand
a. Insert the stand base blocks
fully into the stand slot.
b. Lift the screw handle and turn
the screw clockwise.
c. After fully tightening the screw,
fold the screw handle flat
within the recess.
1. Attach the stand assembly to
the display.
a. Fit the two tabs on the upper
part of the stand to the groove
on the back of the display.
b. Press the stand down till it
snaps into place.
- 15 -
Philips-head
screwdriver
Torsion of
RC screw:
9±1Kgf