Advertisement
B) Parallel change (equilibrium)
1. Press [測定] (measurement) button under the angle change display.
The character at upper right changes to [H] and [0.0] displays.
The default setting is [0.0] in all ranges. When the setting was changed
the value of the latest setting is displayed.
2. To lower the value, press [-] button. To increase the value, press [+] button.
NB: The movable range is -19.9 to +19.9. Keep pressing the button 1 sec.
or more to change the numbers in succession.
3. Press [変更／決定] (CAL.) button again to complete the setup. When you set up the angle change again,
press [測定] (measurement) button.
4. If a measured value was displayed before setting up, the value is re-calculated with the new setup.
NB. During changes, a power supply is not turned off automatically. Be sure to press an A/P button when the
operation ends.
NOTE
* Powdered objects and granular ones cannot be measured.
* Apply electrodes to the sample with a uniform force (pressure). Depending on the pressure intensity, displayed
value may be different,
* SK-940A has temperature compensation function. So it is not required to compensate the temperature against
the measured value within the measuring range, however if there is a large difference in temperature between
the unit and the sample, it results in measurement error.
Specifications
Model
Measuring method
Measuring ranges
Operating ambient
Power requirement
Dimensions
Weight
Accessories
: SK-940A Instant Moisture Checker
: Electric resistance type
: 9.0 to 40.0% (Types 1, 2, 3 and 5)
12.1 to 58.0% (Type 4)
: 5 to 40℃
: One 9V battery (6F22)
: Main body: 62 (W) x 148(H) 24(D)mm
Cord length: 0.5m
: about 145g (including the battery)
: 1 pc. of 9V battery, carrying case
3-4, Kanda-kajicho, Chiyoda-ku, Tokyo 101-0045 Japan
URL: http://www.sksato.co.jp/english/
3
B) Parallel change
Advertisement
