NEC ITY-6D Start Manual page 10

The phone will now pick the headset as the default
communication method when placing and answering phone calls.
To return the phone to non-headset mode, follow the steps in
"Configure a Headset" and set Headset to Disabled.
Connect a Computer (Optional)
A computer can be connected to the network through the phone using a
LAN cable if there are a limited number of available ports on the local area
network.
Note: Any devices connected to the phone's PC port will be temporarily disconnected from the
network when the phone is rebooted, or when the phone itself is disconnected from the
network because of the power turned off.
Note: If a device connected through the PC port is having connection issues, contact your system
administrator to verify that the PC port is enabled on the phone.
1. Insert the LAN cable into PC port on the back of the phone, until it sounds
a click.
Figure 8: Insert the LAN cable into the PC port
5