Advertisement
Available languages
Available languages
2.3 Charging the lithium battery
To recharge the lithium battery of the camcorder, s
ter with the USB cable
battery). The red indicator light on the back of the camcorder will light
to indicate that the battery is being charged, and will turn off when fully
charged. You can also charge the battery by connecting the camcorder to
AC
if you have an
2.4 Powering on / off the camcorder
Press the Power button to turn on the camcorder. To turn it off, s
ss it again for 3 seconds. If the battery is discharged, the message
"Low
" will
automatically turn off in a few seconds.
2.5 Mode switching
Press the Mode button to switch between
set
modes. The selected mode will
the screen as an icon.
2.6 Connecting to a c
By connecting the camcorder to your c
the files stored on the memory card (MSDC) or use it as a PC camera.
vided in the box (without removing the
ter to which you can connect the USB cable.
on the screen indicating that the camcorder will
ter
Plug the USB cable into the third
interface on the back of the
camcorder to connect it to your
c
4
y connect it to your
to, video,
yback and
in the
left corner of
ter, you can either transfer
ter.
Advertisement
