AgfaPhoto CC2700 User Manual page 19

5. Finally ss the OK button to save and return to the
6.5 Frequency
This setting allows you to
lighting conditions for shooting are low.
1. Press the Mode button to enter the set
settings menu.
2. Then ss the
3. Press the OK button to enter the submenu.
4. Press the
tions: 60Hz / 50Hz / Cancel.
5. Finally ss the OK button to save and return to the
6.6 Formatting
This function allows you to format the camcorder and the memory card
by deleting all the files stored on them. Since deleted files cannot be
restored, se use this function with caution.
1. Press the Mode button to enter the set
settings menu.
2. Then ss the
3. Press the OK button to enter the submenu.
4. Press the
5. Confirm execution again: Yes / No.
6. Finally ss the OK button to save and return to the
6.7 Default settings
If the set of the camcorder become too c
longer works
settings. The date will not be deleted from the camcorder or memory card.
1. Press the Mode button to enter the set
settings menu.
2. Then ss the
3. Press the OK button to enter the submenu.
4. Press the
Yes / No.
5. Confirm execution again: Yes / No.
6. Finally ss the OK button to validate and return to the
vent the image from blinking when the
/ Down buttons to select this setting.
/ Down buttons to select from the following frequency
/ Down buttons to select this setting.
/ Down buttons to choose to launch formatting: Yes / No.
y, use this function to restore the factory default
/ Down buttons to select this setting.
/ Down buttons to choose to restore the default settings:
mode and access the
mode and access the
x and the camcorder no
mode and access the
18
vious menu.
vious menu.
vious menu.
vious menu.