Prepare Your Camera For Use - AgfaPhoto DC5200 User Manual

Prepare your camera for use

Lithium ba�ery installa�on
Please install the lithium ba�ery supplied with the camera before using it according to the following instruc�ons.
1. Slide the ba�ery cover below the camera to access the ba�ery compartment:
Install lithium ba�ery
2. Inser�he lithium ba�ery in the correct polarity direc�on.
3. Then close the ba�ery cover and slide i�o lock i�n place.
Note: Please remove the ba�ery if you are not going to use the camera for a while.
Lithium ba�ery charging
To recharge the lithium ba�ery, simply connec�he camera (without removing the ba�ery) to your computer using the USB
cable provided in the box. The red LED on the back o�he camera will light up to indicate tha�he ba�ery is being charged, and
will turn off when fully charged. You can also charge the lithium ba�ery by connec�ng the camera to AC power if you have an
adapter to which you can connec�he USB cable.
SD memory card installa�on
This camera supports SD memory card up to 64 GB (no�ncluded). The internal memory can only store a few photos for test
purposes, these photos will be lost when you turn off your camera or remove away the ba�ery. I�s necessary to insert a SD
card into the camera before using it. Make sure tha�he SD card is inserted correctly by gently sliding i�nto the slot un�l it
clicks into place to confirm tha��s locked. To remove the card, simply press i�irmly and the card will ejec�tselffrom the slot.
7