Haier HLF103Q User Manual page 10

Various button initial status for "Normal program"
Cycle Signal
Wrinkle Care
Cycles
Nixie display
Temp
sensor Dry Level
Timed/Cycles
2. Press "Auto-Dry Cycles" button to select a suitable full automatic cycle
The Normal program will be automatically selected after powering on. If other
full automatic program is desired, press "Auto-Dry Cycles" button
until corresponding indicator turns on.
To select your desired settings the "Custom" function should be chosen.
It can memorize programs defined by user and display the previous program
upon next application of this function.
Use details are as follows:
After powering on, press "Auto-Dry Cycles" until"Custom" status, then set
"Timed-Dry Cycles" to Timed Dry or Rack Dr y, and set status of other buttons.
Press "Start/Pause" button or after half a minute, the program defined by
user himself will be stored and will be directly displayed upon next use.
Notes: Pressing "Sensor Dry Level" button will be inactive during use of
"Custom" function.
8
Softer
Off
Normal
Indicate current program remaining time
High
More Dry
Auto-program
Normal
Heavy
Cotton
Bulky Items
Auto-
Auto-Dry
Cycles
Cycles
Casual
Delicate
Touch Up
Custom