Sony DSC-HX7 Service Manual page 22

Assembly-1: Precaution During SP Holder (930) Installation.
Route the speaker harness as shown below.
SP Holder (930)
Speaker
Harness
Ribs
DSC-HX7/HX7V_L2
Assembly-2: Precaution During of Cabinet (Upper)
Assy (930) installation.
Adjust the position of the zoom switch and the zoom lever.
RL-108 Board Zoom switch
Cabinet (Upper) Assy (930) Zoom lever
After assembling, check whether the zoom lever turn to
the T/W both sides.
Zoom lever
3. ASSEMBLY
Assembly-3: Attaching Method of LCD Cushion (930),
LCD Window (930).
Set the LCD cushion (930).
Adhesive side
LCD cushion (930)
Cabinet (Rear) Assy (930)
Put the LCD.
LCD
Remove the LCD.
LCD
Remove the released paper of the LCD cushion (930).
Tab
3-1E
Install the LCD again.
LCD
Fit the LCD window (930) in to the flame of
cabinet (rear) assy and attach to the LCD cushion (930).
LCD Window (930)
Adhesive part of
the LCD Cushion (930)
LCD
Released Paper of
the LCD Cushion (930)
Blow the air before attaching.
Be sure to keep away from dust.