Table of Contents
Advertisement
Install Cisco NCS 1000 32-Channel Mux/Demux Patch Panel
Figure 6: Mounting Mux/Demux on ETSI Rack
1
Figure 7: Mounting Mux/Demux on 23-Inch Rack
1
2
Step 3
Using a screwdriver, tighten the screws to a torque of 4.65 N-m (41 in-lb).
Step 4
Establish grounding for the mux/demux panel. The ground position is present on the rear side of the mux/demux
panel. For more information, see
M4 Phillips Flat Screw
12-24x0.5" Phillips Pan Head Screw
#12 Lock Washer
Ground NCS 1000 32-Channel Mux/Demux Patch Panels, on page
Install Cisco NCS 1000 32-Channel Mux/Demux Patch Panel
Install NCS 1000 32-Channel Mux/Demux Patch Panels
3.
9
Advertisement
Table of Contents
