Timer Operation - Haier HSU-09H03/1 Operation Manual

Operation

TIMER Operation

Set Clock correctly before starting Timer operation
You can let unit start or stop automatically at following times: Before you wake up in the
morning, or get back from outside or after you fall asleep at night.
TIMER ON/OFF
(1)After unit start, select your desired operation mode.
Operation mode will be displayed on LCD.
Power indicator on indoor unit lights up.
(2)TIMER mode selection
Press TIMER button to change TIMER mode.
Every time the button is pressed, display changes as follows:
blank
OFF
TIMER OFF
Select your desired TIMER mode (TIMER ON or TIMER
OFF) ON or OFF will flash.
(3)Timer setting
Press HOUR / button.
Every time the button is pressed, time increases 1h.
If button is kept depressed, time will change quickly.
Every time the button is pressed, time decreases 1h.
If button is kept depressed, time will change quickly. Time
will be shown on LCD. It can be adjusted within 12 hours.
Time displayed: Unit starts or stops after x hour . (TIMER
ON or TIMER OFF).
To cancel TIMER mode
Just press TIMER button several times until TIMER mode disappears.
Notice
Once the remote controller set the timer, the period is memorized. From next time
operate easily with operation of the ON/OFF switch and the timer mode swith.
Hints
After replacing the dry batteries, the designated period is set automatically as
follows: OFF: 1 hour, ON: 6 hour. Set the timer again if necessary.
If the power fails, set timer again.
ON
TIMER ON
8
ON/OFF TEMP
1
MODE
SET
3
4
FAN
TIMER
3
2
SWING CLOCK
POWER/SOFT
LOCK
RESET