Cisco Unified MeetingPlace H.323/SIP Administrator's Manual page 21

Chapter 2 Installing Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1
Enter the information in
Step 4
window.
Table 2-2
Field
Route Pattern
Numbering Plan
Gateway/Route List
Route Option
Step 5 To save your settings, click Insert.
Once you click Insert and the window refreshes, an (Edit) link appears in the window next to the
Note
Gateway/Route List field. This link takes you to the Gateway Configuration or Route List Configuration
window for reference, depending upon whether the Gateway/Route List field contains a gateway or a
route list. You can see the route group that is included in that route list if the route group was specified.
If the route group was not specified, you see devices.
How to Install or Upgrade to Cisco Unified MeetingPlace
H.323/SIP IP Gateway Software Release 5.2.1
You must configure Cisco Unified CallManager before you install Release 5.2.1.
Note
This section includes the following procedures:
•
•
•
•
•
•
OL-6571-02
How to Install or Upgrade to Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1
Table 2-2
Fields in the Route Pattern Configuration Window
Installing Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1, page 2-6
Upgrading to Cisco Unified MeetingPlace H.323/SIP IPGW Software Release 5.2.1 From
Cisco Unified MeetingPlace IP Gateway Release 5.x, page 2-6
Upgrading to Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1 From
Cisco Unified MeetingPlace IP Gateway Release 4.x, page 2-7
Configuring Cisco Unified MeetingPlace Gateway SIM, page 2-7
(Optional) Changing Cisco Unified MeetingPlace Gateway SIM Settings, page 2-8
(Optional) Uninstalling Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1,
page 2-9
Administrator Guide for Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1
into the corresponding fields in the Route Pattern Configuration
Description
Enter the number for IP-gateway that you configured in
Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release
5.2.1 Server to the Cisco Unified CallManager Configuration
Database" section on page
connect to the Cisco Unified MeetingPlace
If applicable, choose the appropriate numbering-plan option.
Choose the host name or IP address of the IP-gateway server.
Choose Route this pattern and deselect the Provide Outside Dial
Tone box.
2-2. This is the number that callers use to
Audio Server system.
"Adding the
2-5