Engine Operation - Perkins 1104D Operation And Maintenance Manual

44
Operation Section

Engine Operation

Engine Operation
Engine Operation
Correct operation and maintenance are key factors in
obtaining the maximum life and economy of the
engine. If the directions in the Operation and
Maintenance Manual are followed, costs can be
minimized and engine service life can be maximized.
The engine can be operated at the rated rpm after
the engine reaches operating temperature. The
engine will reach normal operating temperature if the
engine is operated at low idle speed and operated
with a light load. This procedure is more effective
than idling the engine at no load. The engine should
reach operating temperature in a few minutes.
Gauge readings should be observed and the data
should be recorded frequently while the engine is
operating. Comparing the data over time will help to
determine normal readings for each gauge.
Comparing data over time will also help detect
abnormal operating developments. Significant
changes in the readings should be investigated.
Fuel Conservation Practices
The efficiency of the engine can affect the fuel
economy. Perkins design and technology in
manufacturing provides maximum fuel efficiency in
all applications. Follow the recommended procedures
in order to attain optimum performance for the life of
the engine.
• Avoid spilling fuel.
Fuel expands when the fuel is warmed up. The fuel
may overflow from the fuel tank. Inspect fuel lines for
leaks. Repair the fuel lines, as needed.
• Be aware of the properties of the different fuels.
Use only the recommended fuels.
• Avoid unnecessary idling.
Shut off the engine rather than idle for long periods of
time.
• Observe the air cleaner service indicator
frequently. Keep the air cleaner elements clean.
• Maintain the electrical systems.
One damaged battery cell will overwork the
alternator. This will consume excess power and
excess fuel.
• Ensure that the drive belts are correctly adjusted.
The drive belts should be in good condition.
• Ensure that all of the connections of the hoses are
i02330143
tight. The connections should not leak.
• Ensure that the driven equipment is in good
working order.
• Cold engines consume excess fuel. Utilize heat
from the jacket water system and the exhaust
system, when possible. Keep cooling system
components clean and keep cooling system
components in good repair. Never operate the
engine without water temperature regulators. All of
these items will help maintain operating
temperatures.
i02330149
SEBU8172-04