5.4.2. Product Information
You can display the product information including brand
name, product name, loader version, software version, and
hard disk size.
To upgrade software:
● Press the OK button on the Product Information menu,
then the SW Upgrade menu will appear.
● To scan particular channel, use the / buttons to select a
mode between Auto and Manual.
● In the manual mode, you can select the channel and PID
value using the /// buttons.
● To start the software upgrade, press the OK button.
When the receiver is transferring, you must keep
a thing intact until transfer is ended.
5.4.3. Reset
You can restore the factory preset values in case the user
has encountered some problems after changing any new
values for channel data and others, which may be in error.
● Use the / buttons to select OK, then press the OK
button.
● Enter your own PIN code to start reset. (The factory preset
PIN code: 0000)
5.5. Mailbox
You can read the messages from the service providers.
Press the EXIT button to exit the menu.
OPERATING THE RECEIVER
GB-49