Download Print this page

Baxi 110 E Installation, Assembly And Operating Instructions For The Installer And The User page 12

Enamelled storage cylinders

Advertisement

Caldera LAIA GT (CC-119) y NGO 50 GT (CC-131) / Boiler LAIA GT (CC-119) and NGO 50 GT (CC-131) /
Caldeira LAIA GT (CC-119) e NGO 50 GT (CC-131)
ES
Notas:
– Retirar los puentes 6-7 y 11-12 de la regleta de
la caldera.
– Realizar el puente 8-14 en la regleta del
depósito.
– Interconectar caldera-depósito y depósito-
circulador ACS con cables:
Sección de 2,5 mm
Sección de 1 mm
, H05W-F
2
– Para conectar la resistencia eléctrica (W)
hacerlo entre los bornes 3-5 y
Utilizar cable H05W-F de sección 2,5 mm
Realizar también las siguientes operaciones:
– Retirar el puente 4-5 de la caldera
– Retirar los puentes 5-6 y 8-14 del depósito
– Realizar el puente L-7 en el depósito.
– Realizar la conexión 5-8 entre caldera-
depósito.
– Cambiar las conexiones caldera-depósito 7-7
por caldera-depósito 7-14.
12
GB
Notes:
– Remove the boiler jumpers across 6-7 and 11-
12.
– Install a jumper for the cylinder across 8-14.
– Connect the boiler-cylinder and cylinder-DHW
pump using:
, H05W-F
2
H05W-F.
– Wire the electric heater (W) across terminals
del depósito.
3-5 and
.
wire must be used. Also carry out the following
2
operations:
– Remove the boiler jumper across 4-5.
– Remove the cylinder jumper across 5-6 and
8-14.
– Install a jumper across L-7.
– Connect the boiler with the cylinder across 5-8.
– Exchange the boiler-cylinder connnection 7-7
for boiler-cylinder 7-14.
2.5 mm
2
cross-section, H05W-F.
1
m m
c r o s s - s e c t i o n ,
2
the cylinder. H05 W F 3 Gx 2.5 mm
PT
Notas:
– Retirar as pontes 6-7 e 11-12 da caldeira.
– Effectuar a ponte 8-14 no depósito.
– Interligar caldeira-depósito e depósito-circulador
A.Q.S. com cabos:
Secção 2,5 mm
Secção 1 mm
2
, H05W-F.
– Para ligar a resistência eléctrica (W) fazê-lo
entre os bornes 3-5 e
cabo H05 W F 3 Gx 2.5 mm
as siguintes operações:
2
– Retirar a ponte 4-5 da caldeira.
– Retirar a ponte 5-6 e 8-14 do depósito.
– Realizar a ponte L-7 no depósito.
– Realizar a ligação 5-8 entre caldeira-depósito.
– Trocar a ligação caldeira-depósito 7-7 pela
caldeira-depósito 7-14.
, H05W-F.
2
do depósito. Usar
. Realizar também
2

Advertisement

loading

This manual is also suitable for:

150 e200 e300 e500 e