Haier AB182ACAEA Operation And Installation Manual page 4

Cautions
All electrical repairs must be carried out
by qualified electricians. Inadequate repairs
may result in a major source of danger for
the user of the air conditoiner.
Do not damage any parts of the air
conditioner that carry refrigerant by
piercing or perforating the air conditioner's
tubes with sharp or pointed items, crushing
or twisting any tubes, or scraping the
coatings off the surfaces. If the refrigerant
spurts out and gets into eyes, it may result
in serious eye injuries.
Do not obstruct or cover the ventilation
grille of the air conditioner. Do not put
fingers or any other things into the
inlet/outlet and swing louver.
Do not allow children to play with the air
conditioner. In no case should children be
allowed to sit on the outdoor unit.
Specifications
The refrigerating circuit is leak-proof.
The machine is adaptive in following
situation
1. Applicable ambient temperature range:
DB C
Indoor
WB C
Cooling
DB C
outdoor
WB C
DB C
Indoor
Heating
WB C
DB C
outdoor
WB C
2. If the supply cord is damaged, it must be
replaced by the manufacturer or its service
agentor a similar qualified person.
3. If the fuse on PC board is broken please
change it with the type of T 3.15A /250VAC.
Rated Maximum Minimum
27 32 18
19 23 14
35 43 10
24 26 6
20 27 15
14.5 -- --
7 24 -7
6 18 --
4. The wiring method should be in line with
the local wiring standard.
5. The power cable and connecting cable are
self-provided. The requirement of the power
cable:
Model
AB182ACAEA
AB282ACAEA
AB42NACAEA
The requirement of the connecting cable:
H04RN-F 4G: 2.0mm
(AB282ACAEA AB42NACAEA)
H04RN-F 4G: 4.0mm
AB182ACAEA)
ll the cables shall have got the European a
uthentication certificate.
. The breaker of the air conditioner should b
e all-pole switch; and the distance between i
ts two contacts should be no less 3mm. Such m
eans for disconnection must be i
ncorporation in the fixed wiring.
. The waste battery shall be disposed p
roperly.
. The indoor unit installation height is at l
east 2.5m.
2
H07RN-F
2
3G 4.0mm
H07RN-F
2
5G 2.5mm
x3+0.75mm x1
2 2
x2+2.0mm x3
2 2