Haier AB182ACAEA Operation And Installation Manual page 13

Maintenance
4. Install air filter
(1)Put the air filter into those extruding parts at the top of the air inlet grille.
(2)Draw the handles at the back of the air inlet grille inwards to fix the air filter.
5. Close air inlet grille
Referring to procedure 1.
Clean the air inlet grille
1. Open air inlet grille
Pull the two handles at the same time, slowly draw them
out. (when closing it, the procedure is reversed.)
2. Remove air filter
Referring to ìClean the air filterî.
3. Remove the air inlet grille
Open the air inlet grille for 45 , the lift it up.
4. Clean
Do not use the hot water over 50 C to clean
to avoid discoloration or deformation.
Use soft brush, water and neutral detergent to clean,
then throw the water off.
[ When there is too much dust ]
Use ventilation fan or directly spray the detergent special for kitchen
ware on the air inlet grille, 10 minutes later use water to clean.
5. Install air inlet grille
Referring to procedure 3.
6. Install the air filter
Referring to ìClean the air filterî
7. Close air inlet grille
Referring to procedure 1.
Notice
Instruction
11
Open