Charging The Battery - HTC Touch Touch Diamond Quick Start Manual

To install the battery
1.
Align the battery's exposed
copper contacts with the
battery connectors inside
the battery compartment.
2.
Insert the contact's side of
the battery first and then
gently push the battery into
place.
3.
Replace the back cover.

5. Charging the Battery

New batteries are shipped partially charged. Before you start
using your device, it is recommended that you install and charge
the battery.
To charge the battery
1.
Connect the USB connector of the AC adapter to the sync
connector on your device.
2.
Plug in the AC adapter to an electrical outlet to start
charging the battery.
The battery is fully charged after about 3 hours of charging.
Quick Start Guide 9