Philips Sonicare HealthyWhite+ Manual page 15

-
To activate charger confirmation:
Press and hold the intensity level button up (+) for 2 seconds. You
hear 2 beeps and the battery level indicator lights up green twice
to indicate that the charger confirmation feature has been
activated.
-
To deactivate charger confirmation:
Press and hold the intensity level button up (+) for 2 seconds.
You hear 1 beep and the battery level indicator lights up yellow
once to indicate that the charger confirmation feature has been
deactivated.
Cleaning
Toothbrush handle
1 Remove the brush head and rinse the metal shaft area with warm
water. Make sure you remove any residual toothpaste (Fig. 12).
Caution: Do not push on the rubber seal on the metal shaft with
sharp objects, as this may cause damage.
2 Wipe the entire surface of the handle with a damp cloth.
Brush head
1 Rinse the brush head and bristles after each use (Fig. 13).
2 Remove the brush head from the handle and rinse the brush head
connection with warm water at least once a week.
Charger
1 Unplug the charger before you clean it.
2 Wipe the surface of the charger with a damp cloth. Make sure you
remove any toothpaste or other residue from the charger surfaces.
35_020_9630_2_DFU-booklet simple_A6_v1.indd 15
15
English
18/12/15 13:42