Philips Sonicare HealthyWhite+ Manual page 12

12
English
Brushing modes
Clean mode
The ultimate in plaque removal (default mode). Clean mode lasts for
2 minutes and includes four 30 second Quadpacer intervals.
White mode
To brighten and polish your front teeth. White mode lasts for
2.5 minutes and includes four 30 second Quadpacer intervals and
two and two additional 15 second Quadpacer intervals to focus on
your visible front teeth.
1 Press the power on/off and mode button to turn on your Philips
Sonicare.
2 Press the power on/off and mode button again within 2.5 seconds
to switch to White mode.
3 Press the power on/off and mode button after 2.5 seconds to
pause your Philips Sonicare.
Intensity levels
-
Low: 1 LED indicator light
-
Medium: 2 LED indicator lights
-
High: 3 LED indicator lights
Note: To adjust the intensity level to the next higher or lower level,
press the + intensity level button to increase intensity or the -
intensity level button to decrease intensity at any time during the
brushing cycle
Battery status (when handle is not on charger)
-
A flashing yellow battery level indicator indicates a low charge.
-
A flashing green battery level indicator indicates a moderate
charge.
-
A solid green battery level indicator indicates a full charge (Fig. 6).
35_020_9630_2_DFU-booklet simple_A6_v1.indd 12 18/12/15 13:42