Direct Set Up - One for All URC-7525 Instruction Manual

(How to set up the ONE FOR ALL to control your devices)
Example: to set up the ONE FOR ALL for your Television, LCD-TV or
Plasma-TV:
1
2
3
4
ATT: If none of the codes listed for your brand operate your device, or if
your brand is not listed at all, try the search method described on
page 6.
5
- Most TV's do not switch ON pressing the POWER key. Please press and
release MAGIC followed by CHANNEL+ to switch your TV back on.
- Some codes are quite similar. If your device does not respond or is not
functioning properly with one of the codes, try another code listed under
your brand.
- To differentiate between device types the first digit of every Television,
LCD-TV or Plasma-TV code is "1" whilst the first digit of every Set-Top-Box,
Digital Satellite, Cable Box or Freeview/DVB-T Box code is "2".
WW W.ONEFORA LL.COM

Direct SET UP

Find the code for your device in the Code list (page 91 - 102).
Codes are listed by brand name. The most popular code is listed
first. Make sure your device is switched on (not on
standby).
Press and hold the MAGIC key until the red light (LED
underneath the POWER) blinks twice. The LED will light up
once then twice.
Enter the first (five-digit device code) according to your brand
using the number keys. The LED will blink twice.
Now, aim the ONE FOR ALL at your device and press POWER to
see if your device switches off.
→ → If your device switches off: proceed to step 5.
→ → If your device does not respond: Repeat step 3 and 4
within 10 seconds. If you do not enter a new code within 10
seconds you will need to repeat step 2 also.
Press MAGIC as soon as your device switches off to store the
code.
5