User-Defined Pattern Example - HP PCL 5 Reference Manual

This example prints the following:
Figure 14-6 Patterned Fill Example

User-defined Pattern Example

This example shows how to print a user-defined pattern which has
already been downloaded to the printer. For this example we will print
the pattern of triangles which was downloaded in the example in
Chapter 13, under "User-Defined Pattern Command."
The following commands define a 600 PCL Unit square rectangular
area, select ID number 3, and print the user-defined pattern
associated with that ID number.
1
2
EN
Position the cursor:
E
*p300x400Y
C
Moves the cursor to PCL Unit position (300,400) within the
PCL coordinate systems.
Specify the width and height of the rectangle:
E
*c600a600B
C
Rectangular Area Fill Examples 14-17