HP PCL 5 Reference Manual page 292

3
4
5
6
Note An area's width extends in the positive X-direction of the PCL
coordinate system, and the height extends in the positive Y-direction.
The Pattern Transparency Mode controls how a pattern fills a
rectangular area. Pattern Transparency Mode determines what
effect transparent or opaque) the white pixels of the pattern have
on the rectangular area (refer to "Pattern Transparency Mode
Command" in Chapter 13).
1.
command.
14-2 PCL Rectangular Area Fill Graphics
Specify width of rectangle (Horizontal Rectangle Size Command -
E
Decipoints=
*c#H
C
Specify height of rectangle (Vertical Rectangle Size Command -
E
Decipoints=
*c#V
C
Select specific shade, cross-hatch, or user-defined pattern
(Pattern ID Command -
Fill rectangular area with pattern (Fill Rectangular Area
E
Command -
c#P
C
patterned area.
White (1), black (0) or current (5) pattern also can be specified using this
E
, or PCL Units=
C
E
, or PCL Units=
C
E
- Chapter 13)
*c#G
C
1
). This ends the procedure and prints the
).
*c#A
).
*c#B
1
.
EN