Using Block Recognizer - HP iPAQ rz1700 series User Manual

1. From any program, tap the up arrow next to the Input Panel
button.
2. Tap Letter Recognizer.
3. Write a letter or symbol between the dashed line and
baseline.
a. To display in uppercase, write a letter between the hatch
b. To display in lowercase, write a letter between the hatch
c. To use numbers, write a number or draw a symbol
What you write is converted to typed text on the screen.
Note:
between the dashed line and baseline.
■
When writing a letter like "p," write the tail portion below
the baseline and the top portion within the dashed line and
baseline.
■
When writing a letter like "b," write the top portion above
the dashed line and the bottom portion within the dashed
line and baseline.
Note:
program and tap the question mark next to the writing area.

Using Block Recognizer

Use the stylus and Block Recognizer to write letters, numbers,
and symbols in specific areas. Create words and sentences by
writing letters and numbers in specific areas.
To write with the stylus and Block Recognizer:
User's Guide
marks labeled ABC.
marks labeled abc.
between the hatch marks labeled 123.
For Letter Recognizer to work effectively, write characters
To view help on using Letter Recognizer, open the
Entering Information
6–4