Cisco 6.x and 7.0 Integration Notes page 2

With ibm lotus sametime instant messaging for cisco unified meetingplace release 6.x and 7.0

Revised: December 3, 2008 3:24 pm

How to Prepare to Install Cisco Unified MeetingPlace

Click-to-Conference with IBM Lotus Sametime Instant Messaging

End users install Cisco Unified MeetingPlace Click-to-Conference with IBM Lotus Sametime Instant Messaging using the

procedures in the Quick Start Guide for Installing and Using Cisco Unified MeetingPlace Click-to-Conference with IBM Lotus

Sametime Instant Messaging. However, the system administrator must prepare the plug-in for installation by performing the

following tasks:

•

Review System Requirements, page 2

Configuring the Update Site to Host Cisco Unified MeetingPlace Click-to-Conference with IBM Lotus Sametime Instant

•

Messaging on your IBM Lotus Domino Server, page 2

Review System Requirements

Before preparing to install Cisco Unified MeetingPlace Click-to-Conference with IBM Lotus Sametime Instant Messaging,

review the system requirements by reading one of the following:

• System Requirements for Cisco Unified MeetingPlace Release 6.x at

http://www.cisco.com/en/US/docs/voice_ip_comm/meetingplace/6x/requirements/60mpsysreqs.html

• System Requirements and Compatibility Matrix for Cisco Unified MeetingPlaceRelease 7.0 at

http://www.cisco.com/en/US/docs/voice_ip_comm/meetingplace/7x/english/requirements/70mpsysreqs.html

Configuring the Update Site to Host Cisco Unified MeetingPlace Click-to-Conference

with IBM Lotus Sametime Instant Messaging on your IBM Lotus Domino Server

All Cisco Unified MeetingPlace IBM Lotus Sametime plug-ins must be hosted on a web server, called an Update Site, so that the

end user can download it.

Procedure

Enable the http service on your IBM Lotus Domino server.

Step 1

Step 2

Create a directory in the C:\Program Files\Lotus\Domino\data\domino\html directory. For example, if you create a

directory called "plugins" and place your Update Site in that directory, then you can browse to the Update Site through

http://<your-domino-server>/plugins/site.xml.

Download the .tar file containing the plug-in to the directory that you created in

Step 3

Extract the contents of the .tar file to a temporary directory.

Step 4

Step 5

Move the contents of the temporary directory to the directory that you created in

Note the full http path to the site.xml file, for example, http://<your-domino-server>/plugins/site.xml. This path is used

Step 6

during installation of the plug-in.

Step

Meetingplace click-to-conference