Drive Screen - Siemens TP700 Comfort Operating Instructions Manual

5.

DRIVE SCREEN

The Drive Screen contains all status information for every drive fitted to the
machine.
The left hand side of the screen give a status report on each drive. When a
particular drive is healthy, the status windows will be coloured green. If a drive is
suffering from a fault, this will turn to red and the error will be detailed in the output
field.
If any errors are not cleared by pressing the Reset Drive Faults button, then make a
note of the error code and contact Gillard Tech (tech@gillardcutting.com or 01684
851989).
The right hand side of the screen indicates, in real time, the utilisation of each drive
and the current position of the belts.
Boom Switch: If a motorised boom is fitted then it can either be used in Auto
or Manual mode. If Auto is selected, the boom will open every time
the belts are stopped to allow for free movement of the product.
For more technical support, please go to our website:
www.gillardcutting.com/technical
17