Screens
4.2 "Status" screen selection
The cell status is displayed as follows:
Color
No color
Green
Yellow
Red
Pink
Calling the screen
Press the "Status" button in the navigation bar. Select the "Power Cells" screen.
Figure 4-4
4.2.4
"Drive" screen
The "Drive" screen displays the current status of the control bits. The bit values are displayed
as follows:
● High signal = green
● Low signal = white
This screen shows faults in the communication with the automation system. The
communication with the drive object (e.g. vector) is shown in the example.
Calling the screen
Press the <Status> button in the navigation bar. Select the "Drive" screen.
20
Cell status
Not charged
Charged
Fault pending
Alarm pending
Bridged (bypass)
Example: "Power Cells" screen, double-circuit
TP900 Function Manual
Function Manual, 10/2016, A5E39487277A