Operating Your Wine Cooler - Vinotemp VT-32TSFE-SM Owner's Manual

OPERATING YOUR WINE COOLER

CONTROLS
POWER
To control this appliance turn on/off. To turn OFF the appliance, touch and hold the
seconds.
LIGHT
To control the inner light turn on/off.
UP
Used to raise (warm) the set temperature by 1°C or 1ºF.
DOWN
Used to lower (cool) the set temperature by 1°C or 1ºF.
ºF/ºC Selector
Select the temperature display setting in Fahrenheit or Celsius degree. To change the temperature
from Fahrenheit to Celsius or from Celsius to Fahrenheit, touch and hold
KEY LOCK
The controls will be locked automatically after two minutes. To release the lock, touch the
marks at the same time for at least 5 seconds.
SETTING A TEMPERATURE
• You can set the temperature as required by pressing the UP or DOWN button. When you press the
two buttons for the first time, the LED readout will show the original temperature set previously (the
temperature preset at the factory is 54ºF/12°C).
• The temperature will increase 1ºF/1°C if you press the UP button once, or the temperature will
decrease 1ºF/1°C if you press the DOWN button once.
• To view the "set" temperature at any time, press the UP or DOWN button, the "set" temperature will
temporarily "flash" in the LED display for 5 seconds.
• The internal storage temperature will appear in blue color in the temperature display window.
NOTE: When using the unit for the first time or after a long period of inactivity, there may be a
variance of a few degrees between the selected temperature and the temperature indicated on the
LED readout. This is normal due to the length of inactivity, and will correct itself after the unit is run for
a few hours. If the unit is unplugged, has lost power or is turned off, wait 3 to 5 minutes before
restarting the unit. The unit will not restart before this time delay.
10
W W W . V I N O T E M P . C O M
mark for 5
mark for 5 seconds.
and