Table of Contents
Advertisement
Information on data protection
When your appliance is connected for
the first time to a Wi-Fi network, which is
connected to the Internet, your
appliance transmits the following
categories of data to the Home Connect
server (initial registration):
Unique appliance identification
■
(consisting of appliance codes as
well as the MAC address of the
installed Wi-Fi communication
module).
Security certificate of the Wi-Fi
■
communication module (to ensure a
secure data connection).
The current software and hardware
■
version of your household appliance.
Status of any previous resetting to
■
factory settings.
This initial registration prepares the
Home Connect functions for use and is
only required when you want to use
these Home Connect functions for the
first time.
Ensure that the Home Connect
Note:
functions can be used only in
conjunction with the Home Connect
app. Information on data protection can
be accessed in the Home Connect app.
Declaration of Conformity
BSH Hausgeräte GmbH hereby
declares that the appliance with
Home Connect functionality meets the
basic requirements and other relevant
provisions of the Directive 1999/5/EC.
A detailed R&TTE Declaration of
Conformity can be found online at
www.bosch-home.com among the
additional documents on the product
page for your appliance.
Replacing the condensation drain
Œ
Replacing the
condensation drain
By default, the condensation from the
R e p l a c i n g t h e c o n d e n s a t i o n d r a i n
appliance runs into the condensation
container.
Alternatively, you have the option of
discharging the condensation water into
the waste-water system via a drain
hose. If you choose to discharge the
condensation water into the waste-water
system, you will not need to empty the
condensation container during the
drying programme or after each time
you use the dryer.
Replace the condensation drain as
follows:
Remove any accessories from the
1.
drum.
Remove all items from the bag.
2.
en
37
Advertisement
Table of Contents
