3
Program a device.
Vehicles with auto anti-glare inside rear view mirror
Vehicles with Digital Rearview Mirror
Programming a device other than an entry gate (for U.S.A. owners)
Press and hold the remote control transmitter button until the HomeLink
changes from slowly flashing orange to rapidly flashing green (rolling code) or continuously
lit green (fixed code), then release the button.
Programming an entry gate (for U.S.A. owners)/Programming a device in the Cana-
dian market
Press and release the remote control transmitter button at 2 second intervals, repeatedly,
®
until the HomeLink
(green) (rolling code) or continuously lit (green) (fixed code).
4
Test the HomeLink
ing the indicator light:
®
● HomeLink
completed. The garage door or other device should operate when a HomeLink
button is pressed and released.
®
● HomeLink
device is equipped with a rolling code. To complete programming, firmly press and
hold the HomeLink
● If the garage door or other device does not operate, proceed to "Programming a
rolling code system".
indicator light changes from slowly flashing (orange) to rapidly flashing
®
operation by pressing the newly programmed button and observ-
indicator light illuminates: Programming of a fixed code device has
indicator light flashes rapidly: The garage door opener motor or other
®
button for 2 seconds then release it.
®
indicator light
®
84