Stopping the hybrid system
1
Stop the vehicle completely.
2
If the parking brake is in manual mode, set the parking brake.
3
Press the P position switch. (P.28)
Check that the shift position indicator shows P and the parking brake indicator is illumi-
nated.
4
Press the power switch.
5
Release the brake pedal and check that "ACCESSORY" or "IGNITION ON" is not
shown on the meter.
Changing power switch modes
Modes can be changed by pressing the power switch with the brake pedal released. (The
mode changes each time the switch is pressed.)
1
Off
The emergency flashers can be used.
2
ACCESSORY mode
Some electrical components such as
the audio system can be used.
"ACCESSORY" will be displayed on
the meter.
3
ON mode
All electrical components can be used.
"IGNITION ON" will be displayed on
the meter.
26