Changing Pedal Functions - Casio PRIVIA PX-S1100WE User Manual

Configuring Settings

Changing Pedal Functions

A pedal connected to the Digital Piano's bm DAMPER PEDAL jack functions as a damper pedal under initial Digital Piano default
settings. You can use the procedure below to change the pedal to another function.
■ To change the function of the pedal connected to the DAMPER PEDAL jack.
1.
Hold down 3 FUNCTION.
• Do not release 3 FUNCTION until step 3, below.
2.
Press the B6 keyboard key.
A0
Each time the B6 keyboard key is pressed to change this setting, a notification tone sounds to indicate the newly selected
setting.
Notification
With this setting: The pedal does this:
Tone Count
1 Damper
2 Sostenuto
3 Soft
4 Metronome
5 Tempo setting
3.
After the setting is the way you want, release 3 FUNCTION.
EN-44
C1 C2 C3
Sustains notes played while the pedal is depressed, even if the keyboard key is subsequently
released. Organ and other tones that are sustained as long as keyboard key are depressed
continue to sound as long as the pedal is depressed.
Only the notes of the keys that are depressed when the pedal is pressed are sustained, even
if the keyboard keys are released, until the pedal is released.
Slightly lowers and softens notes played while the pedal is depressed.
Starts and stops the metronome.
Pressing the pedal multiple times will cause the tempo value to change to match the timing of
the pedal presses.
C4 C5 C6 C7 C8
B6