Table of Contents
Advertisement
Connecting Headphones (Sold
Separately)
Plugging in headphones cuts off output from the built-in
speakers, which means you can practice playing even late at
night without disturbing others.
• Be sure to turn down the Digital Keyboard volume level
before connecting headphones.
• Headphones do not come with the Digital Keyboard.
• Use separately sold or commercially available headphones.
• Do not listen to output over headphones at very high
volume levels for long periods. Doing so creates the
risk of hearing damage.
• If the plug of the headphones does not match the
PHONES/OUTPUT jack, use a commercially available
adapter plug.
• If you are using headphones that require an adapter
plug, make sure you do not leave the adapter plugged
in when removing the headphones.
PHONES/OUTPUT jack
(3.5mm stereo mini jack)
Stereo mini plug
Connecting a Pedal (Sold
Separately)
To use a pedal, connect it to the PEDAL jack.
PEDAL jack (6.3mm standard jack)
Connecting a Microphone
(Commercially Available)
Connect a commercially available dynamic microphone to the
MIC IN jack.
• Before connecting, turn the MIC VOLUME knob to its
lowest setting.
MIC VOLUME knob
MIC IN jack (6.3mm standard jack)
• Before connecting a microphone, make sure that the
Digital Keyboard and microphone are turned off.
• It will take a few seconds for the microphone to
become enabled after you turn on the Digital Keyboard.
EN-6
Getting Ready to Play
Pedal (sold separately)
Advertisement
Table of Contents
