Using The Self-Timer Setting; Using The Burst Setting - HP Photosmart R742 User Manual

Chapter 3
(continued)
Date & Time Imprint (
remains in effect until it is changed, even when you turn off the camera.
•
•
•
Camera Setup...—Displays the
(see
Camera Help...—Displays a list of help topics for commonly used features.
NOTE: Some menu options are not available in certain shooting modes.

Using the Self-Timer setting

The Self-Timer allows you to take an image or video clip 10 seconds after pressing
the Shutter button.
1. While in the
Self-Timer, press
disappears.
2. Set the camera on a tripod or stable surface.
3. Frame the subject in the Image Display.
4. Press the Shutter button halfway down to lock focus and exposure. When the focus
brackets turn green, press the Shutter button all the way down. The camera begins
the 10-second countdown, then takes the picture or begins recording the video clip.
5. If you are recording a video clip, press the Shutter button to stop recording.
TIP: If you want to include yourself in the picture, place the camera on a tripod or
stable surface, then press the Shutter button all the way down. The camera locks
focus and exposure just before the end of the countdown, allowing you time to place
yourself in the scene.
The Self-Timer setting resets to Off after the image is taken.

Using the Burst setting

Burst allows you to take up to three pictures as quickly as possible when you press
and hold the Shutter button all the way down.
1. While in the
, highlight On, press
2. Frame the subject, then press the Shutter button halfway down to lock the focus and
exposure. Then press the Shutter button all the way down and hold it. The camera
takes up to three pictures as quickly as possible until you release the Shutter button
or the camera runs out of memory.
The Image Display remains off during the burst capture. After the burst images have been
taken, each image appears one at a time in Instant Review (see
on page 10). You can delete the entire burst sequence in Instant Review. To delete
individual images, see
16 Setting options for taking pictures and recording video clips
only)—Imprints date in lower left corner of image. The setting
Off (Default)—No date or time imprinted on the image.
Date Only—Date permanently imprinted.
Date & Time—Date and time permanently imprinted.
"Using the Camera Setup Menu" on page
Picture Capture or
, highlight On, press
Picture Capture Menu, use
, then hold down
"Deleting images" on page
Camera Setup Menu for setting camera behavior
32).
Video Record menu, use
, then hold down
to highlight
until the menu disappears.
19.
to highlight
until the menu
Burst , press
"Instant Review"