KitchenAid KRVC 1810 Instructions For Use Manual page 15

Commissioning your wine cabinet
Switching on the cabinet
Press on the internal
before the cabinet''s temperature is displayed.
At the time of switching on, if the set temperature is less than the ambient temperature, the blue cold
circuit indicator will light up.
If the set temperature is higher than the ambient temperature, the red hot circuit indicator will light up.
To put your cabinet on standby, press on the button
To adjust the temperature of your 3 temperature cabinet:
Recommended setting range for the MAIN COMPARTMENT (Maturing Compartment):
10 to 14°C (50° to 57°F)
Recommended setting range for the upper Compartment (Room temperature Compartment):
16 to 20°C (61° to 68°F).
The default setting for the Maturing Compartment is 12°C / 54°F (ideal maturing temperature).
However, this setting can be adjusted between 9 and 15°C (48° and 59°F).
Beyond these limits, the buttons
The default setting for the Room temperature Compartment is 18°C / 64°F (ideal room
temperature). However, this setting can be adjusted between 15 and 22°C (59° to 72°F).
Beyond these limits, the buttons
With the 3 temperature models, the temperature of the Chilling Compartment is controlled by the
temperature set in the maturing compartment
For this reason, should you wish to set a chilling compartment temperature of less than 8°C / 46°F, the
temperature in the maturing compartment should be less than 12°C / 54°F (approx.10°C / 50°F).
WARNING: To operate correctly your cabinet should be located in a room with a temperature
between 12 and 25°C (54° and 77°F).
When making substantial changes to the temperatures it may take several hours to stabilise and display the
required temperature.
Lighting mode adjustment
Your wine cabinet has mood lighting that also enables you to read your wine labels more easily.
Unlike standard lighting, KitchenAid lighting does not produce ultraviolet rays, and only gives off a
miniscule amount of heat.
Thus, your wines are preserved in total safety
Electrical consumption less than 7 watts / hour in constant use.
Usage precautions:
• Intense light, never look directly into the beam.
• There are 3 possible lighting settings:
- lighting disabled,
- lighting when door opens (it goes out when the door is closed),
- lighting all the time (for mood lighting when using a glass door cabinet, for example).
and standby button and then release. A start-up message flashes for 5 seconds
and
and
for 5 seconds.
are disabled.
are disabled.
15