KitchenAid KRVC 1810 Instructions For Use Manual page 13

Arrangement and storage
Modifying the layout of your cabinet
To change the position of a storage shelf, you must first
of all unload the shelf, then remove the shelf supports taking
care to reinstall them as shown opposite:
To change the position of a sliding shelf, you must first of
all completely unload it. Then lift out the sliding tray by
sliding it forwards whilst at the same time lifting it from the
front. Find the runner guides on the left and right and
remove. Then reinstall them in the new position as shown
below:
Then replace the sliding drawer as shown opposite:
Sliding shelf
Guide
Shelf
support
Setting up the front part
of the guide
Guide
13
Wall
Wall
Guide
Setting up the rear part
of the guide
Wall
Guide
Guide
Wall
Wall