Figure 1-1.
Preparing to Install the ATM T3/E3 PMC Module
Before beginning the installation, verify the following:
•
•
•
313889-A Rev 00
Four panhead screws
Shipping Contents
You have the proper equipment and tools; see
You have the communications devices and the cabling that you need to attach
to the PMC module; see
The PMC input and output cable interface is AC or DC coupled as
appropriate; see
"Setting AC or DC Coupling" on page
Using the ATM T3/E3 PMC Module
Antistatic wrist strap
Two 75 ohm mini-SMB
coaxial adapters
T3E3001
"Tools and Cables" on page
"Tools and Cables" on page
1-4.
1-4.
1-4.
1-3