Restoring This Product To The Default Settings; Appendix; Troubleshooting - Pioneer AVIC-F980DAB Operation Manual

Other functions
1
3 Touch [Set Password].
4 Enter the password.
p 5 to 16 characters can be entered for a password.
5 Touch [Go].
6 Enter a password hint.
p Up to 40 characters can be entered for a hint.
7 Touch [Go].
p If you want to change the password currently set, enter the
current password and then enter the new one.
8 Check the password, and then touch [OK].
Deleting the password
The current password and password hint can be deleted.
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
58
2 Touch , followed by , and then touch and
1 2
hold .
3
 Refer to Setting the password on page 70.
3 Touch [Clear Password].
4 Touch [Yes].
5 Touch [OK].
6 Enter the current password.
7 Touch [Go].
A message indicating that the security setting is cancelled
appears.
Restoring this product to the
2 3
default settings
You can restore settings or recorded content to the default
settings. Various methods are used to clear user data.
Method 1: Remove the vehicle battery
p Some of the settings and recorded contents will not be reset.
Method 2: Restore the default settings from the
"System" menu
 Refer to Restoring the default settings on page 71.
Method 3: Press the RESET button
 Refer to Resetting the microprocessor on page 4
p Some of the settings and recorded contents will not be reset.
Restoring the default settings
CAUTION
Do not turn off the engine while restoring the settings.
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
58
2 Touch [AV Source Settings].
3 Touch [Restore Settings].
A message confirming whether to initialise the settings appears.
4 Touch the item you want to initialise.

All Settings
Almost all settings or recorded content returns to the
default.
 Audio Settings
p This setting is available when the source is turned off.

Theme Settings

Bluetooth Settings
5 Touch [Restore].

Appendix

Troubleshooting

If you have problems operating this product, refer to this section.
The most common problems are listed below, along with likely
causes and solutions. If a solution to your problem cannot
be found here, contact your dealer or the nearest authorised
Pioneer service facility.
Common problems
A black screen is displayed, and operation is not possible
using the touch panel keys.
 "Power OFF" mode is on.
— Press any button on this product to release the mode.
 The rear view camera image is displayed with no camera
connection and the wrong camera polarity setting.
— Press and hold the MAP button to release the rear view
camera screen and then change the camera polarity
setting to "Battery".
Problems with the AV screen
CD or DVD playback is not possible.
 The disc is inserted upside down.
— Insert the disc with the label upward.
 The disc is dirty.
— Clean the disc.
 The disc is cracked or otherwise damaged.
— Insert a normal, round disc.
 The files on the disc are in an irregular file format.
— Check the file format.
 The disc format cannot be played back.
— Replace the disc.
 The loaded disc is a type this product cannot play.
— Check what type of disc it is.
The screen is covered by a caution message and the video
cannot be shown.
 The handbrake lead is not connected or the handbrake is not
applied.
— Connect the handbrake lead correctly, and apply the
handbrake.
 The handbrake interlock is activated.
— Park your vehicle in a safe place and apply the handbrake.
No video output from the connected equipment.
 The "AV Input" or "AUX Input" setting is incorrect.
— Correct the settings.
The audio or video skips.
 This product is not firmly secured.
— Secure this product firmly.
71