Storing Song Information To An Ipod (Itunes ® Tagging); Selecting The Video For The Rear Display; Setting The Anti-Theft Function - Pioneer AVIC-F980DAB Operation Manual

Other functions
2 Touch the desired mode.

Full:
A 4:3 picture is enlarged in the horizontal direction only,
enabling you to enjoy an image without any omissions.
 Zoom:
A 4:3 picture is enlarged in the same proportion both verti-
cally and horizontally.

Normal:
A 4:3 picture is displayed normally, without changing its
proportion.
 Trimming
An image is displayed across the entire screen with the
horizontal-to-vertical ratio left as is. If the screen ratio differs
from the image, the image may be displayed partly cut off
either at the top/bottom or sides.
p Different settings can be stored for each video source.
p When a video is viewed in a wide screen mode that does not
match its original aspect ratio, it may appear different.
p The video image will appear coarser when viewed in "Zoom"
mode.
Storing song information to an
iPod (iTunes Tagging)
®
You can store song information to the iPod when this product
receives song information. The songs will appear in a playlist
called "Tagged playlist" in iTunes the next time you synchronize
your iPod. You can directly buy the songs via iTunes.
p The iTunes ® Tagging function is available when the song
information is available.
p This function is available for the following iPod models:
iPhone 3G, 3GS, 4, 4s
iPod touch 1st, 2nd, 3rd, 4th generation
iPod classic 1st, 2nd generation
p The version of iTunes must be 7.4 or higher.
70
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
58
2 Touch [AV Source Settings].
3 Touch [Tag Forwarding] to select the USB port
you use.
4 Tune into the broadcast station.
 Refer to Radio on page 37
5 Touch the song information.
The information on the song on air is stored in this product.
When the information is acquired, turns off and
displayed.
p The song information for up to 50 songs can be stored in this
product.
6 Connect your iPod.
The song information is transferred to your iPod.
p When your iPod is already connected, the song information
will be transferred directly to your iPod every time you touch
the song information.
Selecting the video for the rear
display
You can choose either to show the same image as the front
screen or to show the selected source on the rear display.
p Video files on the external storage device are not available as
a source for the rear display when [Apple CarPlay] is acti-
vated in [Smartphone Setup].
F88DAB/F80DAB
p Video files on the external storage device are not available as
a source for the rear display when [Android Auto] is acti-
vated in [Smartphone Setup].
1 Display the AV source selection screen.
2 Touch [Rear].
3 Touch the source you want to show on the rear
display.

Mirror
The video on the front screen of this product is output to the
rear display.
— Not all videos or sounds can be output to the rear display.

DVD/CD
The video and sound of a disc are output to the rear display.
— Compatible video types are DVD-V, Video-CD, DivX, MPEG-
1, MPEG-2, and MPEG-4 only.
 USB/iPod1
The video and sound of the USB storage device or iPod are
output to the rear display.
— The port that supports the rear display will only be USB
port 1.
— Compatible file types are MPEG-4, H.264, WMV, MKV, and
FLV only.
 SD (*1)
The video and sound of the SD memory cards are output to
is
the rear display.
— Compatible file types are MPEG-4, H.264, WMV, MKV, and
FLV only.

AV
The video and/or sound of the AV input source are output to
the rear display.
— The video image and sound are output only when "AV
Input" is set to "Source".
 Refer to Starting procedure (for AV source) on page 55.

Source OFF
Nothing is output to the rear display.
p (*1) F88DAB/F80DAB

Setting the anti-theft function

You can set a password for this product. If the back-up lead is cut
after the password is set, this product prompts for the password
at the time of next boot up.
Important
If you forgot your password, contact the nearest authorized
Pioneer Service Station.
Setting the password
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
58
2 Touch , followed by
1
hold .
3
, and then touch and
2