Table of contents Information for Your Safety..................3 How to Use.........................4 Assembling cleaner .......................4 Using the cleaning head and Accessory Nozzles..............6 Using the Brush ........................8 Emptying the Dust Chamber ....................9 Operation..........................10 How to Plug in and use......................10 Adjusting the Suction level ....................10 Park-System ........................10 Storage ..........................10 Cleaning the Motor Filter ....................11...
Do not use the appliance If the power cord is damaged or faulty. If the power cord is damaged, it must be replaced by an approved LG Electronics Service Agent to avoid a hazard. Always switch the vacuum cleaner off before: Emptying the dust chamber.
How to Use Assembling Cleaner Fit the large cleaning head into the end of the tube. Spring latch Telescopic pipe Large cleaning head Telescopic pipe Push the head onto the • Press the spring latch to release. telescopic pipe. • Pull out the pipe to the desired length. •...
Page 5
Head Flexible Hose Attachment Point Button Connecting the flexible hose • Push the end of the head on the flexible hose into the attachment point on the vacuum cleaner. • To remove the flexible hose from the vacuum cleaner, press on the button situated on the head, then pull the head out of the vacuum cleaner.
How to Use Using the cleaning head and Accessory Nozzles Tear the vinyl bag and pull out accessories. Attach the accessory holder onto the telescopic tube. And then, fit the Dusting Brush, Crevice Tool and Upholstery Nozzle onto the accessory holder. Fit the accessory onto the end of the tube. Crevice tool Upholstery nozzle Dusting brush...
Page 7
• Cleaning carpet and floor nozzle Pedal Carpet Floor Carpet and floor nozzle • Dual Cleaning Head Equipped with • Open the cover by pulling the hook. a pedal that allows you to adjust its position according to the type of floor. •...
Emptying the dust chamber Button Dust chamber cap Dust chamber The dust tank needs emptying when indicator is turned to red. Suction power may be weakened when insignificant dusts are sucked. In this case, clean the filter. • Turn off the vacuum cleaner and unplug it. •...
How to Use Operation Suction control switch Switch button POWER CONTROL FLOOR CARPET SOFA CURTAIN Cord reel button Plug How to Plug in and Use Park System Storage Adjusting the Suction level • Pull out the power cord to • To store after •...
Cleaning the Motor Filter 24Hrs Button The reusable filters are situated under the dust chamber cap and WARNING! you can use it permanently. • Press the button and pull the dust chamber forward. Gently rinse both parts separately under a cold running •...
How to Use Cleaning the Dust Chamber, Cleaning the Exhaust Filter Dust chamber cap Filter cover Dust chamber Open the dust • The exhaust filter is a washable reusable HEPA filter. chamber cap. • To change the exhaust filter, remove the filter cover on the body by rotating the filter cover counter-clockwise.
Page 13
What to Do if Your Vacuum Cleaner Does Not Work Check that the vacuum cleaner is correctly plugged in correctly and that the electrical socket is working. What to Do When Suction Performance Decreases • Turn off the vacuum cleaner and unplug it. •...