Advertisement
CHAPTER 3. DISASSEMBLY AND ASSEMBLY
1. SEPARATING DISPLAY UNIT AND
STAND UNIT
1) Remove the screws and separate the display unit 1 from the stand
unit 2.
1
2. REMOVING KEY BOARD
1) Remove the screws and then remove the rear cabinet.
2) Remove the screws and connectors, and then remove the KEY board.
3. REMOVING POWER SUPPLY/INVERTER
BOARD AND MAIN BOARD
1) Remove the hex. screws A and screws B, and then remove the shield.
2) Remove the screws A and then remove the ground lead.
3) Remove the connectors and screws B, and then remove the power
supply/inverter board.
4) Remove the connector locking tape.
5) Remove the connectors and screws, and then remove the main board.
4. REMOVING LCD MODULE
1) Remove the screws A and then remove the front cabinet 1.
2) Remove the screws B, and then remove the frame 2 from the LCD
module 3.
A
LL-T15S3 DISASSEMBLY AND ASSEMBLY
3 – 1
A
1
A
A
Advertisement
