Connection In Simple Access Point Mode - Dukane 8930C User Manual

2.4.1 Connection in Simple Access Point Mode

Set the following when connecting the projector and the computer in Simple
Access Point mode.
Projector setting
the power of the projector and pull out the power cord's plug from the outlet. Do
projector.
2) Turn on the projector.
3) Press the MENU button on the remote control or the
control panel of the projector.
IP ADDRESS
SSID
ENCRYPTION
CH
About network settings
Computer setting
setting of the computer.
2) Select SSID set for the projector by following the procedure of wireless
connection of the computer. Enter encryption key by following the computer's
instruction if it is encrypted.
NOTE
USB TYPE A
ENTER
2. Connection to the network
port of the projector.
.
15