Table of Contents
Advertisement
Item
PRESENTATION
(continued on next page)
required. It can be installed from the bundled application
information from the Hitachi website.
Refer to 4. Network Presentation (76) for the details of
Network Presentation.
If you set a computer to the Presenter mode while
its image is projected, the projector is occupied by
the computer and access from any other computer is
blocked.
QUIT
PRESENTER
allow other computers to access the projector.
MODE
Select this item to display a dialog.
The Presenter mode is cancelled and a message is
displayed indicating the result.
If you set one or more computers to the Multi PC
mode and send their images to the projector, you can
select the display mode on the projector from two
options below.
- Single PC mode: displays the image of the selected
computer on full screen.
- Multi PC mode: displays the images sent from up to
sections.
Select this item to display a dialog.
MULTI PC
MODE
explained below.
select one of computers in the dialog using the
button.
ENTER or INPUT again. The image for the selected
computer is displayed on full screen.
(continued on next page)
2. Connection to the network
Description
ENTER or INPUT
35
Advertisement
Table of Contents
