Crosley CR6001A Instruction Manual page 5

ESPA OL
Ubicación de los Mandos
Mandos en el Aparato
18. Clip de Retención - Brazo Acústico
19. Tornillo de Suspensión del Tocadiscos
20. Leva Brazo Acústico
21. Soporte – Brazo Acústico
22. Selector de Velocidades
23. Brazo Acústico
24. Tocadiscos
25. Adaptador para Discos 45 rpm
26. Enchufe (Jack) Entrada Auxiliar
27. Interruptor Entrada
28. Enchufe (Jack) Salida Auxiliar
29. Enchufe (Jack) USB
30. Cordón de Energía CA
31. Antena FM en alambre
32. Tecla Tocar
33. Tecla Rebobinar
34. Tecla Avance Rápido
35. Tecla Parar / Expulsar
36. Puerta de Casete
31
18 19 20
21
22
23
24
25
26 27
30
28 29
31
32 33 34 35 36
ENGLISH
Cassette Operation
1
Rotate the Function Switch (2) to TAPE mode.
2
While in TAPE mode,press the Stop/Eject (35)
button on the cassette player to open the cassette
door.
3
Insert a prerecorded cassette tape into the
cassette door.
4
Press the Play button (32) to begin play.
5
To stop playback, press the Stop/Eject (35)
button.
6
Press the Stop/Eject (35) button again to
eject the cassette.
To Fast Forward or Rewind
1
While playback is stopped, press the Fast
Forward (34) or Rewind (33) button to fast
forward or rewind the cassette.
2
Once the desired position is reached on the
cassette, press the Stop/Eject (35) button
to stop the cassette.
3
Press the Play button (32) to begin play.
The cassette player plays the side of the
NOTE:
cassette facing away from the unit. To
play the other side of the cassette, you
must eject the cassette and turn it over.
Basic Operation
Radio Operation
1
Rotate the Function Switch (2) to select
RADIO mode.
2
Set the Band Button(AM/FM) (7) to the
desired band (AM or FM).
3
Select the desired radio station by rotating
Tuning Knob (5)
4
Adjust the Volume Knob (12) to the desired
sound level.
Antenna
Antenna: for FM reception, the unit is provided with
a FM WIRE ANTENNA (31) , move the wire until
the reception is clear and with no interferences. For
AM reception, the unit is provided with a directional
build-in ferrite antenna. Rotate the set to find the
position in which the best reception is obtained. Do
not connect the EXTERNAL FM ANTENNA (31) to
any outside antenna.
USB Operation
Using the included software and cable, the USB
connection allows you record your records onto your
computer. Follow these instructions to use the USB.
1
Insert the enclosed software CD into your
computer.
2
Follow the instructions on the computer screen
to install the software. If the software does not
load automatically, browse the CD and open
the Read Me folder for further instructions.
3
Connect the small end of the USB cable to the
USB Jack (29) on the back of the unit.
4
Connect the other end to a USB port on your
computer.
5
On your computer, open the Record Recording
Software.
6
For instructions on operating the Record
Recording Software, browse the software CD
and open the Read Me folder.
8