Crosley CR6001A Instruction Manual page 4

ESPA OL
Operación de Base
Operación del Tocadiscos
1
Gire el Selector de Función (2) para seleccionar
el modo Tocadiscos [Phono].
2
Ponga el Selector de Velocidad (22) a la velocidad
correcta (33-1/3, 45 ó 78 rpm) para el disco
seleccionado.
3
Utilice el Leva-Brazo (20) para levantar el brazo
acústico de su soporte. Ponga el brazo acústico
por encima del disco y utilice el leva-brazo para
bajarlo al punto donde Usted quiere que comience
la música.
4
Al fin del disco, el brazo acústico va a regresar
a su soporte.
33
Adaptador para
Accesorio:
discos 45 RPM
Este adaptador le permite tocar los discos 45 rpm.
1
Ponga el ADAPTADOR (44) en el eje.
2
Coloque su disco 45 rpm suavemente en el
tocadiscos.
3
Siga las instrucciones en la sección operación
del tocadiscos para tocar su disco.
ENGLISH
Unpacking
1
Remove packing materials from unit.
NOTE: Save all packing materials.
2
Remove plastic bag covering radio.
3
Remove plastic safety cover from A/C plug.
4
Remove tie from A/C cord and untie antenna
wire on back of radio.
5
Open lid and remove styrofoam shipping
material from turntable.
6
Remove black tie-wrap from under the tone
arm.
7
Remove tape and white protective needle cover
by gently pulling them towards the front of the
unit.
8
Turn the TURNTABLE SUSPENSION SCREW
clockwise until it is all the way down.
Do not force or over tighten it. This allows the
turntable to float on its shock absorbers.
9
Release tone arm hold down clip by gently
pushing to the right. This will unlock tone arm
from its arm rest. Re-lock the hold down clip
when moving the unit to another location.
Getting Started
Power Source
1
Unwind the AC Power Cord (30) at the back
of the unit and connect it to a power outlet.
2
Plug A/C cord into appropriate outlet.
AC
Polarized Plug
3
This product is equipped with a polarized
alternating current line plug (a plug having one
blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety
feature, If you are unable to insert the plug fully
into the outlet, try reversing the plug. If the plug
should still fail to fit, contact you electrician to
replace your obsolete outlet. Do not defeat the
purpose of the polarized plug.
Headphones Jack Operation
1
Connect headphones to the Headphone
Jack (6)
2
Adjust volume to the desired listening level.
NOTE: When using headphones, the sound to the unit
speakers will be cut off.
NOTE: Headphones not included.
Headphone Jack(6)
6