Replacing The Power Supply - HP Vectra VT6 Supplementary Manual

2 PC Hardware Structure

Replacing the Power Supply

Replacing the Power Supply
If it is necessary to remove a faulty power supply, and to replace it by a new
one, the following steps can be taken:
1 Disconnect the power connectors from all boards and accessories.
2 Undo the four screws that hold the power supply rear bezel on to the
power supply box.
3 Pivot the power supply box away from its rear bezel.
4 Take the power supply box out from the inside of the computer chassis.
Unscrew
Unscrew
Unscrew
Unscrew
To install the new power supply, reverse the steps which were followed
when removing the old power supply.
27