12X Video Ide Dvd-Rom Drive - HP Vectra VL800 Technical Reference Manual

12X Video IDE DVD-ROM Drive

1
Some models have a DVD-ROM (Read Only) drive. It can play any standard
audio CDs and DVD movies (with the same regional code). It can read any
CD-ROM and DVD-ROM (data) discs. It also has audio playback capability
and can play and standard audio CDs. It conforms to optical and mechanical
standards as specified in the Red, Yellow, Orange and Green Books.
Data capacity
Sustained data transfer rate
Buffer memory size
High Speed Access
Rotational speed
Interface
Power requirements
1. Refer to the Service Handbook chapter (available at
vectrasupport) to find out which models are installed with this optical drive.
DVD-R/DVD-RAM:
Up to 4.7 Gbytes/side
CD-ROM:
650 MB
DVD-ROM:
16.6 Mbytes/s (DVD single layer)
11.0 Mbytes/s (DVD dual layer)
CD-ROM:
6.0 Mbytes/s max.
DVD-RAM:
2.77 Mbytes/s typical
512 Kbytes
DVD-ROM:
Random access time 120 ms typical (DVD single layer)
CD-ROM:
Random access time 90 ms typical
DVD-RAM:
210 ms typical (1/3 stroke)
DVD-ROM:
5 to 12X max. full CAV (DVD single layer)
3.3 to 8X max. full CAV (DVD dual layer)
CD-ROM:
17 to 40X max. full CAV
DVD-RAM:
2X ZCLV
ATAPI
+5V ±5%
+12V ±10%
5 Mass Storage Devices
Description
www.hp.com/go/
Optical Drives
101