HP Vectra VL6 6 User Manual page 42

Hp vectra vl6 6: user guide

Hide thumbs Also See for Vectra VL6 6:

Table of Contents

2 How to Install Accessories In Your PC

Installing Mass Storage Devices

4 Remove the rear tray by sliding it forward about 1.5 cm (

lifting it up and out.

5 Align the disk drive with the holes in the tray, making sure that the

drive connectors are on the open end of the tray. Then secure the

drive using the screws provided with it.

6 Carefully lower the tray back into position by aligning the metal tabs,

then slide it backwards into place.

7 At the rear of the PC, replace the retainer bracket and screw it in

place, securing the tray.

English

inch) and

Table of Contents

Show Quick Links

Table of Contents

Vectra vl 6/xxx - 6 Vectra vl 6