HP Vectra VL5 5 Network Manual page 10

4 For details of the network adapters present on your system,
click on the + icon on the left-hand side of Network adapters.
You can also double-click on the hardware matching your
configuration to check it's status.
5 If your hardware has a yellow "!" indicated next to it or a
warning message that the device is not functioning properly,
you will need to reinstall the driver by clicking on update
driver. You will then need to select a drive file location for the
updated drivers of your hardware.
6 If your hardware has a red cross (red x) next to it, this means
that the hardware has been disabled. It can be re-enabled
from the general tab.
7 On the advanced tab, you can check some of your device
settings which can be fine tuned to improve your network's
performance.
10